Can you feel the chill in the air? It's that time to break out the hot teas and caramel lattes (Hard pass on the PSL) and enjoy the beautiful changing colors! What better way to crack into this season than with an easy fall craft! Here I'll break down the simple steps to make this adorable scarecrow that can stay indoors with you or adorn your porch for your guests!
Here's what you'll need:
4 small flower pots (1.5 inch)
1 medium flower pot (3 inch)
1 large flower pot (4 inch)
*Sizes can vary for what you want!*
Rope
burlap sheet
straw/hay/raffia
acrylic paint in orange, black and white
hot glue gun
A couple of notes about supplies:
*Rope: You'll see in the supply picture that the rope I use is pretty thick, this may not fit through the flower pot holes, so you can untwist each strand and it works perfectly!
*burlap sheet: Burlap ribbon is totally fine as well! No matter what you use, you'll have to cut it down to size! Burlap sheet or burlap table runner is easier to paint on since the holes are much smaller.
If you want to make this kid friendly, ditch the hot glue gun and use tacky glue or even elders!
The directions:
1. Paint your flower pots orange and let dry! You may need two coats! If you can find vibrant flower pots, you may even skip this step!
2. Cut your rope to size: 2 pieces at 15 inches (legs) and 1 piece at 20 (arms)
3. Measure your burlap to wrap around the medium size pot.
4. Paint the scarecrows face on the burlap.
5. Cut 2 squares/rectangles from your burlap for the patches on the body.
6. Thread the 20 inch rope throw 2 of the small flower pots. Knot the rope at the pot end so the rope will stay! The open side of the put should face out these will be the hands.
7. Thread the 15 inch rope through 1 of the flower pots. Knot the end of the rope near the flower pot. This will be a foot. The other end of the rope is going to be glued to the body. Repeat this step for the other leg.
8. Use hot glue to adhere straw/hay to the insides of all the small flower pots and the medium pot. You just need the inside edge covered!
9. Turn the large pot upside down and place a line of glue horizontal to attach the arm rope.
10. Add more glue to the bottom of this pot to add straw here too which is the neckline!
11. Glue the burlap face to the medium sized pot!
12. Glue the end of the leg rope to the inside of the large pot for his legs.
13. Add more glue on top of the large pot/straw layer to place the head on!
14. Glue on the two square patches to the large body pot!
15. Admire your beautiful crafting :)